注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

從頭再來 Blog

一切將會如小生命的誕生一樣,從頭再來.....

 
 
 

日志

 
 

Proxmox 高阶安装选项  

2013-05-30 10:45:34|  分类: Proxmox |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |

Boot options

The installer creates LVM volumes for the root file-system, data and swap, based on the total disk size. You can customize some of these values, just type on the boot prompt of the installation ISO.

  • At install time, at the boot prompt you can specify "linux" followed by one or more optional parameters, see below:
    • Default partitioning uses ext3, with only ext4 as option. If you want ext4 just type: ext4
    • To define the total size of hd to be used (only Proxmox > 2.3): hdsize=X (where X is in GB, and affects /dev/sda2 size (/dev/sda1 is small and only for boot). This way you can save free space on the HD for further partitioning (i.e. for an additional PV and VG on the same hard disk that can be used for LVM storage type).
    • To define the amount of root partition's disk space: maxroot=X (where X is in GB).
    • To define the amount of swap partition's disk space: swapsize=X (where X is in GB. Default is the same size as installed RAM, with 4GB minimum and HDSIZE/8 as maximum)
    • To define the amount of logical volume "data" space (/var/lib/vz): maxvz=X (where X is in GB).
    • To define the amount of free space left in LVM VG 'pve': minfree=X (where X is in GB, 16GB is the default if storage available > 128GB, 1/8 otherwise)
  • Example, 'linux ext4 maxroot=25 swapsize=8 maxvz=400 minfree=32'
  • follow the instructions as always
  • if you screwed up grub and can't boot from hd anymore, boot from the installer cdrom and at "boot:" prompt just type: pveboot (NOT preceded by "linux"). This will boot from cdrom and mount LVM root and data partitions
  评论这张
 
阅读(441)| 评论(0)
推荐 转载

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2017