注册 登录  
 加关注
查看详情
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

從頭再來 Blog

一切將會如小生命的誕生一樣,從頭再來.....

 
 
 

日志

 
 

[转]IKE Tunnels 配置范本  

2007-06-01 15:00:43|  分类: Network |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |
[转]DI-804HV组网配置
Router to Router
This FAQ is for connecting 2 D-Link routers together (DI-804HV, DI-808HV, and DI-824VUP).
这是一个连接两个路由的解答(DI-804HV, DI-808HV, and DI-824VUP)

Step 1 Log into the web based configuration of the router by typing in the IP address of the router (default: 192.168.0.1) in your web browser. By default the username is admin and there is no password.
第一步:登录进路由器,(默认地址为:192.168.0.1),并且用户名为admin,没有密码。

Step 2 Click the VPN button on the left column, select the checkbox to Enable the VPN, and then in the box next to Max. number of tunnels, enter the maximum numbers of VPN tunnels that you would like to have connected.
第二步:点击《VPN》按钮,选择<enable> VPN,按着输入您想连接的最大通道数。
Step 3 In the space provided, enter the Tunnel Name for ID number 1, select IKE, and then click More.
第三步:在id 1处输入通道名称,<IKE>,按下<more>键。

Step 4 In the Local Subnet and Local Netmask fields enter the network identifier for the local DI-804HV′s LAN and the corresponding subnet mask.
第四步:在< Local Subnet>及<Local Netmask>处输入网络标识及子网淹码,这个标识是DI-804HV所在的本地网络。

Step 5 In the Remote Subnet and Remote Netmask fields enter the network identifier for the remote DI-804HV′s LAN and the corresponding subnet mask.
第五步:在<Remote Subnet>及<Remote Netmask>处输入网络标识及子网掩码,这个标识是远程的DI-804HV所在的网络。

Step 6 In the Remote Gateway field enter the WAN IP address of the remote DI-804HV and in the Preshared Key field, enter a key which must be exactly the same as the Preshared Key that is configured on the remote DI-804HV.
第六步:在<Remote Gateway>处输入WAN IP地址,这个地址是远程的DI-804HV,并且输入主键字段,输入的主键字段必须与远程的DI-804HV中配置的相同

Step 7 Click Apply and then click on Select IKE Proposal...
第七步:点击<apply>并且点击<select ike Proposal>

Step 8 Enter a name for proposal ID number 1 and select Group 1, 2, or 5 from the DH Group dropdown menu.
第八步:输入一个proposal id 数字(1),并且从dh group下拉菜单中选择组(1,2或者5)

Step 9 Select DES or 3DES as the Encryption Algorithm and either SHA-1 or MD5 as the Authentication Algorithm.
选择des或者3des做为加密算法,并且选择sha-1或者md5做为验证算法

Step 10 Enter a Lifetime value and then either select Sec. or KByte as the unit for the lifetime value.
第十步:输入一个生命值,并且在sec.或者kbyte中选择一个做为生命值的计数

Step 11 Select 1 out of the Proposal ID dropdown menu and click Add To, which will add the proposal that was just configured to the IKE Proposal Index. Click Apply and then click Back.
第十一步:Proposal ID下拉框中选择1,并且点击<add to>,这会将第十步的配置加入到<IKE Proposal>索引中,点击<apply>并且点击<back>

Step 12 Click on Select IPSec Proposal...
第十二步:点击选择ipsec Proposal....

Step 13 Enter a name for proposal ID number 1 and select Group 1, 2, 5, or None from the DH Group dropdown menu.

Step 14 Select ESP or AH as the Encapsulation Protocol.

Step 15 Select DES or 3DES as the Encryption Algorithm and either SHA-1, MD5, or None as the Authentication Algorithm.

Step 16 Enter a Lifetime value and then either select Sec. or KB as the unit for the lifetime value.

Step 17 Select 1 out of the Proposal ID dropdown menu and click Add To, which will add the proposal that was just configured to the IPSec Proposal Index. Click Apply and then click Restart.

Step 18 Follow these instructions to configure your Other DI-804HV using the exact same settings for the IKE Proposal and the IPSec Proposal. Also make sure that Step 4 is configured to reflect the LAN settings for what is now the Local DI-804HV and that Steps 5 & 6 are configured to reflect the Subnet and WAN IP of what is now the Remote DI-804HV
第18步,重这些在另一个路由器上。

Step 19 To establish the connection, open a command prompt and ping an IP address of a computer on the remote LAN. Once you receive replies the tunnel has been established.
第十九步:为了建立连接,进入command prompt并且ping远程网络的计算机IP地址。一且您得到ping值,那么通道已经建立。
  评论这张
 
阅读(303)| 评论(0)
推荐 转载

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2018